Ryobi RLM36 Lawn Mower Manual

The Ryobi RLM36 is a powerful cordless lawn mower designed for efficient grass cutting with a 36V battery system. It features a lightweight design, adjustable cutting heights, and a 40cm cutting width, making it suitable for small to medium-sized lawns. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 36V battery, adjustable cutting height, lightweight design, grass collection bag, and ergonomic handle.

FeatureDescription
36V BatteryProvides cordless operation for maximum convenience
Adjustable Cutting HeightAllows customization of grass length
Grass Collection BagCollects clippings for easy disposal
Ergonomic HandleEnsures comfortable operation
Lightweight DesignEasy to maneuver around the yard

Installation

Unpack the mower and check for all components. Assemble the handle and attach the grass collection bag.

  1. Attach the handle: Align and secure with screws provided.
  2. Install the battery: Insert the battery into the compartment until it clicks.
  3. Check for safety features: Ensure all safety guards are in place.

WARNING! Read the manual thoroughly before operating the mower.

First-Time Setup

Charge the battery fully before first use. Follow the instructions for setting the desired cutting height.

  1. Charge the battery: Connect to the charger and wait for the indicator light to turn green.
  2. Set cutting height: Adjust the lever to the desired height setting.
  3. Perform a test run: Start the mower and test its operation on a small area.

CAUTION! Ensure the area is clear of debris before mowing.

Specifications

Controls and Settings

Power button located on the handle for easy access. Cutting height adjustment lever is located on the side of the mower.

Safety Features: Safety key must be inserted to operate the mower. Emergency stop button available.

Connecting Devices

No external devices are required for operation. Ensure the battery is charged before use.

Operating the Mower

To start mowing, press the power button and engage the safety lever.

  1. Begin mowing: Move the mower forward at a steady pace.
  2. Adjust speed as necessary: Maintain a consistent cutting height.
  3. Empty the grass collection bag when full: Release and remove the bag to dispose of clippings.

WARNING! Do not operate on wet grass or slopes greater than 15 degrees.

Maintenance

Regular maintenance is essential for optimal performance. Clean the mower after each use.

  1. Remove grass clippings from the deck.
  2. Check battery connections regularly.
  3. Store in a dry place when not in use.

Safety Information

Always wear appropriate footwear and eye protection while operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery not chargedCharge the battery and try again.
Uneven cuttingIncorrect cutting heightAdjust the cutting height lever.
Grass clippings not collectedBag full or blockedEmpty the bag and check for blockages.
Excessive noiseDebris in bladesTurn off and clean the blades.

Reset: If issues persist, consult customer support.

Service: Contact Ryobi customer service for assistance.

Ryobi RLM36 Lawn Mower Manual © - All Rights Reserved 2026