Ryobi RLM46140 Lawn Mower Manual

The Ryobi RLM46140 is a powerful 40V cordless lawn mower designed for efficient grass cutting. It features a 16-inch cutting deck, adjustable cutting heights, and a lightweight design for easy maneuverability. The mower is equipped with a brushless motor for enhanced performance and longer runtime. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V lithium-ion battery, brushless motor, adjustable cutting height, 16-inch cutting deck, foldable handle for easy storage.

FeatureDescription
Brushless MotorProvides more power and longer runtime
Adjustable Cutting HeightAllows for customized grass cutting height
16-Inch Cutting DeckEfficiently cuts grass in a single pass
Lightweight DesignEasy to maneuver around the yard
Foldable HandleFor compact storage and transport

Installation

Unpack the mower and check for all components. Assemble the handle and attach the battery.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Insert the battery: Ensure the battery is fully charged before use.
  3. Check safety features: Ensure all safety guards are in place.

WARNING! Always wear appropriate safety gear while operating the mower.

First-Time Setup

Charge the battery fully before first use. Follow the instructions for proper battery installation.

  1. Charge the battery: Use the provided charger and plug into a standard outlet.
  2. Install the battery: Insert the battery into the mower until it clicks into place.
  3. Perform a test run: Start the mower and check for proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

The mower features a simple control panel for easy operation. The main controls include the power button, cutting height adjustment lever, and safety switch.

Connecting Devices

This section is not applicable as the mower is a standalone device.

Operating the Mower

To operate the mower, ensure the battery is charged and installed. Press the power button and adjust the cutting height as needed.

  1. Start the mower: Press the power button and engage the safety switch.
  2. Adjust cutting height: Use the lever to set the desired height.
  3. Mow the lawn: Move the mower in a straight line for best results.

WARNING! Do not operate the mower in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance. Clean the mower after each use and check for any wear on the blades.

  1. Clean the deck: Remove grass clippings and debris.
  2. Inspect the blades: Ensure they are sharp and free of damage.
  3. Store properly: Keep the mower in a dry place when not in use.

Safety Information

Always follow safety guidelines when operating the mower. Wear protective gear and keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery not chargedCharge the battery and try again.
Uneven cutBlades dullSharpen or replace the blades.
Battery drains quicklyOld batteryReplace the battery if it's not holding a charge.
Excessive vibrationLoose partsCheck and tighten all screws and bolts.

Reset: If the mower malfunctions, refer to the manual for reset instructions.

Ryobi RLM46140 Lawn Mower Manual © - All Rights Reserved 2026